Syllabus of ME V-Sem all Subjects (RGPV)

(Tag: Syllabus of ME Syllabus of Mechanical Engineering )

Source: (rgpv.ac.in)

  • Internal Combustion Engine: S.I. and C.I. engines of two and four stroke cycles
  • Real cycle analysis of SI and CI engines
  • Determination of engine dimensions speed fuel consumption
  • Output mean effective pressure efficiency
  • Factors effecting volumetric efficiency
  • Heat balance
  • Performance characteristics of SI and CI engines
  • Cylinder arrangement firing order
  • Power balance for multi-cylinder engines
  • Flame development and propagation
  • Pressure-Crank Angle diagram
  • Stages of Combustion ignition lag effect of air density temperature engine speed turbulence
  • Ignition timings Physical and chemical aspects
  • Abnormal Combustion effect of engine and fuel variables on abnormal combustion
  • Pre-ignition its causes and remedy
  • Salient features of various type combustion chambers.
  • Various stages of combustion in CI Engines delay period
  • Diesel knock knock inhibitors
  • Salient features of various types of combustion chambers.
  • Fuel injection in CI engine
  • Working Principle of fuel pump & fuel injectors
  • Types of nozzles.
  • Fuel injection in SI engine (MPFI TBICRDI )
  • Theory of carburetion Solex Carburetor
  • Simple problems on carburetion.
  • Fuel metering in CI engines
  • Classification of IC Engine fuels
  • Desirable characteristics of SI & CI engine fuels
  • Rating of SI & CI engine fuels
  • Alternative fuels for SI and CI engine (liquid gaseous hydrogen LPG CNG Biogas etc.)
  • Air requirement Analysis of combustion products
  • HHV and LHV of fuels.
  • Methods of supercharging & turbo charging
  • Effects of super charging and turbo charging.
  • Engine Modifications for supercharging
  • Supercharging of two stroke engines.
  • Microprocessor controlled supercharging.
  • Cooling & lubrication of SI & CI Engines.

1. Determination of Valve timing diagram

2. Load test on Petrol Engine

3. Heat Balance of SI engine

4. Heat Balance of CI Engine

5. Study of Battery Ignition system and Electronic Ignition System

6. Study of Diesel fuel pump

7. Study of Diesel fuel injectors

8. Study of Carburetors

9. Study of Fuel Injection system in SI Engine

10. Study of lubricating system in CI Engine

 

Source: (rgpv.ac.in)

  • Vibration main causes advantages and disadvantages;
  • Engineering applications of vibration and noise;
  • Vector method of representing harmonic motion;
  • Characteristics of vibration harmonic analysis and beats phenomenon
  • Work done by harmonic forces on harmonic motion; periodic non- harmonic functions-
  • Fourier series analysis; evaluation of coefficients of Fourier series; elements of vibratory system;
  • Lumped and distributed parameter systems.
  • Undamped Free Vibrations: Derivation of differential equation of motion:
  • The energy method the method based on Newton’s second law of motion
  • Rayleigh’s method. Solution of differential equation of motion
  • Natural frequency of vibration
  • Systems involving angular oscillations: the compound pendulum.
  • Viscous damping: coefficient of damping; damping ratio;
  • Under damped over damped and critically damped systems;
  • Logarithmic decrement; frequency of damped free vibration;
  • Coulomb or dry friction damping; frequency decay rate and comparison of viscous
  • Coulomb damping; solid and structural damping;
  • Slip or interfacial damping.
  • One degree of freedom- forced harmonic vibration;
  • Vector representation of forces; excitation due to rotating and reciprocating unbalance;
  • Vibration Isolation force and motion transmissibility;
  • Absolute and relative motion of mass (Seismic Instruments ).
  • Whirling Motion and Critical Speed
  • Definitions and significance. Critical speed of a vertical
  • Light flexible shaft with single rotor : with and without damping .
  • Critical speed of a shaft carrying multiple discs (without damping )
  • Secondary critical speed.
  • Un-damped free vibration of second degree of freedom
  • Principal modes of vibration; torsion vibrations;
  • Forced Un-damped vibrations with harmonic excitation ;
  • Coordinate coupling; Dynamic vibration absorber;
  • Torsion Vibration Absorber;
  • Pendulum type of dynamic vibration.
  • Frequency and sound dependent human response; the decibel scale;
  • Relationship between sound pressure level (SPL) sound power level and sound intensity scale;
  • Relationship between addition subtraction and averaging
  • Sound spectra and Octave band analysis; loudness;
  • Weighting networks; equivalent sound level
  • Auditory effects of noise; hazardous noise exposure due to machines and equipments
  • Hearing conservation and damage risk criteria daily noise doze.
  • Noise: Sources Isolation and Control:
  • Major sources of noise on road and in industries
  • Noise due to construction equipments and domestic appliances
  • Industrial noise control strategies noise control at source (with or without sound enclosures)
  • Noise control along the path (with or without partitions and acoustic barriers );
  • Noise control at the receiver ear defenders earplugs
  • Semi-insert protectors.

1.To find out effect of load on natural frequency of vibrations of a lever pin supported at one end carrying adjustable load on a vertical screwed bar and spring supported at some intermediate point (i) When the dead weight of rods is neglected and (ii) when their dead weight is taken into account .

2. To find out frequency of damped free vibration and rate of decay of vibration-amplitude in the system.

3. To find out natural frequency and damped free frequency of a torsion pendulum and hence to find out coefficient of damping of the oil ;

4. To observe the phenomenon of ‘whirl’ in a horizontal light shaft and to determine the critical speed of the shaft.

5. To observe the mode shapes of a spring-connected double pendulum and hence to

demonstrate the phenomenon of beats.

6. To demonstrate the principle of tuned Undamped Dynamic Vibration Absorber and to determine the effect of mass-ratio (of main and auxiliary mass) on the spread of the resulting natural frequencies;

7. To take measurements of sound Pressure Level (SPL) and to carry out octave band analysis of a machine using Noise Level Meter.

 

Source: (rgpv.ac.in)

  • Definition of Mechatronics Multi-disciplinary scenario origins.
  • Evaluation of Mechatronics An over view of mechatronics
  • Design of mechatronics system.
  • Measurements system and function of main elements of measurement systems.
  • Need for mechatronics in industries.
  • Objectives advantages and disadvantages of mechatronics.
  • Microprocessor based controllers.
  • Principle of working of engine management system
  • Automatic washing machine.
  • Definition and classification of transducers.
  • Definition and classification of sensors.
  • Principle of working and applications of light sensors proximity sensors and Hall effect sensors.
  • MICROPROCESSOR: Introduction
  • Microprocessor based digital control.
  • Digital member system binary and hexadecimal number system
  • Logic functions Data word representation basic Elements of control systems.
  • 8085A processor architecture Terminology-such as
  • CPU memory and address ALU assembler data registers
  • Fetch cycle write cycle state bus interrupts.
  • Micro controllers – difference between microprocessor and micro controllers.
  • Requirements for control and their implementation in micro controllers.
  • Classification of micro controllers.
  • Actuator and actuator system. Classifications of actuator system with examples.
  • Mechanical switches. Concept of bouncing Methods of Preventing bouncing of mechanical switches.
  • Solenoids Relays. Solid state switches – Diodes
  • Thyristors Triacs Transistors Darlington pair.
  • Electrical actuator. Principle construction and working of AC DC motors
  • Stepper motors permanent motors servomotors
  • Servo systems and control
  • HYDRAULIC ACTUATORS: Valves – Classifications Pressure Control Valves
  • Pressure relief valves Pressure regulating/reducing valves
  • Pressure sequence valve. Flow control valves
  • Principle needle valve globe valve.
  • Direction control valve –sliding spool valve solenoid operated.
  • Concept necessity op-amps
  • Protection filtering wheat stone bridge
  • Digital Signals – Multiplexer.
  • Data acquisition
  • Introduction to digital signal processing
  • Concepts and different methods.

 

Source: (rgpv.ac.in)

  • Dynamics of Engine Mechanisms: Displacement
  • Velocity and acceleration of piston;
  • Turning moment on crankshaft turning moment diagram;
  • Fluctuation of crankshaft speed
  • Analysis of flywheel.
  • Governor Mechanisms: Types of governors
  • Characteristics of centrifugal governors
  • Gravity and spring controlled centrifugal governors
  • Hunting of centrifugal governors
  • Inertia governors.
  • Balancing of rotating masses two plane balancing
  • Determination of balancing masses (graphical and analytical methods)
  • Balancing of rotors balancing of internal combustion engines (single cylinder engines
  • In-line engines V-twin engines radial engines
  • Lanchester technique of engine balancing.
  • Frictional torque in pivots and collars by uniform pressure and uniform wear
  • Rate criteria. Boundary and fluid film lubrication
  • Friction in journal and thrust bearings
  • Concept of friction circle and axis rolling friction.
  • Clutches: Single plate and multi plate clutches
  • Cone clutches.
  • Band brake block brakes
  • Internal and external shoe brakes
  • Braking of vehicles.
  • Dynamometer: Different types and their applications.
  • Dynamic Analysis of Cams: Response of un-damped cam mechanism (analytical method)
  • Follower response analysis by phase-plane method
  • Jump and cross-over shock

1- Study of various models of governors.

2- Study of gyroscopic motion and calculation of value of gyroscopic couple.

3- Study of various types of Cams and followers and drawing the cam profile with the help of test kit.

4- Study of various first order vibration systems.

5- To study working of friction clutches using models

 

Source: (rgpv.ac.in)

  • Classification of Automobile alternative fuels(liquid gaseous hydrogen LPG CNG Biogas etc.)
  • Desirable characteristics of SI & CI engine alternative fuels
  • Rating of SI & CI engine fuels
  • Introduction to alternate energy sources.
  • Like EV hybrid fuel cell and solar cars.
  • Merits and demerits of various alternate fuels.
  • Vegetable Oils: Various vegetable oils for automobile engines
  • Esterification performance in engines
  • Performance and emission characteristics
  • Bio diesel and its characteristics. Alcohols:
  • Properties as engine fuel alcohols and gasoline blends
  • Performance in automobile engine
  • Methanol and gasoline blends.
  • Biogas: Introduction to Biogas system
  • Process during gas formation Factors affecting biogas formation.
  • Usage of Biogas in SI engine & CI engine.
  • Properties of Natural gas Hydrogen gas
  • LPG & CNG as engine fuels storage and handling
  • Performance and safety aspects to all gaseous fuel
  • Fuel metering systems.
  • Types of automobile emissions emission characteristics
  • Formation of automobile emissions
  • Mechanism of HC CO and NO in SI engine
  • Exhaust emission and factors affecting the emission
  • Evaporative emission crankcase emission
  • Lead emission CI engine emissions:
  • Formation of smoke factors affecting the smoke formation
  • Unburned hydrocarbons carbon monoxide oxides of nitrogen
  • Smog and comparison of diesel and petrol emissions.
  • Emission norms as per Bharat Standard up to BS – IV and procedures for confirmation on production.
  • Demerits of automobile emission to environment.
  • Types Of Catalytic Conversion
  • Measurement Techniques Emission Standards
  • Test Procedure NDIRFID Chemiluminescent analyzers
  • Gas Chromatograph smoke meters emission standards.

1. Study of alternative fuel for automobile.

2. Study of esterification of alternative fuels.

3. Study of blending different types of bio-diesel.

4. Measurement of smoke from automobile.

5. Study of different types of emissions.

6. Study of various techniques for NOx reduction.

 

Syllabus of ME-504 (A) (Industrial Engineering & Ergonomics)

Source: (rgpv.ac.in)

  • Purpose of work study its objectives procedure and applications;
  • Method study definition and basic procedure selection of job
  • Various recording techniques like outline
  • Process charts flow process charts man machine charts
  • Two handed process charts string diagram flow diagram
  • Multiple activity chart simo cyclographs and chrono-cyclographs;
  • Critical examination development
  • Installation and maintenance of improved method;
  • Principles of motion economy and their application in work design;
  • Micro motion study memo motion study and their use in methods study.
  • Introduction & definition objectives and basic procedure of work measurement;
  • Application of work measurement in industries; time study: basic procedure
  • Equipments needed methods of measuring time selection of jobs
  • Breaking a job into elements;
  • Numbers of cycles to be timed; rating and methods of rating
  • Allowances calculation of standard time.
  • Work sampling: Basic procedure
  • Design of work sampling study conducting work sampling
  • Study and establishment of standard-time.
  • Starlight line Tailor Merrick and Gantt
  • Incentive plans
  • Standard data system; elemental and non-elemental predetermined motion systems
  • work factors system;
  • Methods Time Measurement (MTM) MOST
  • Definition and history of development of human factors engineering
  • Types & characteristics of man-machine-system
  • Relative capabilities of human being and machines;
  • Development and use of human factor data;
  • Information input and processing: Introduction to information theory;
  • Factors effecting information reception and processing;
  • Coding and selecting of sensory inputs.
  • Display- types of visual display
  • Visual indicators and warning signals;
  • Factorial and graphic display;
  • General principles of auditory
  • Tactral display characteristics and selection.

 

Source: (rgpv.ac.in)

  • historical perspective teamwork TQM and ISO 9000;
  • Information technology and Business Process Re-engineering (BPR);
  • TPM and quality awards; aids and barriers to quality mgt
  • Creating vision and initiating transformation
  • Establishing programs for education and self coordination
  • Policy setting and review flowchart of policy mgt and relation with daily mgt.
  • Improvements measurement of key indicators;
  • Quality mgt leader; cross functional teams and coordination
  • Policy setting and review flowchart of policy mgt and relation with daily mgt.
  • Definition variation and feedback funnel-marble experiment-
  • Rules of adjustment and its effects quality- definition
  • Goalpost and kaizen view quality of design
  • Conformance and performance; Taguchi loss function
  • Cost of quality chain action of improving quality to productivity to motivation and low cost;
  • Deming’s theory of mgt fourteen points and variance reduction;
  • Attributes enumerative and variables analytic studies.
  • Basic discrete and continuous distributions measures of central tendency
  • Variability and shapes sampling size and central value theorem
  • Control chart structure process plotting and stability
  • Study of out-of-control evidences defect detection and prevention
  • Use of control charts in evaluating past present and future trends;
  • Attribute control charts count and classification charts
  • Construction and interpretation of p np c and u charts
  • PDSA cycle(plan do study act) and R charts and s charts
  • Individual and moving range chart
  • Trial control limits and out of control points.
  • Between and Within Group variations
  • Periodic and persistent disturbances control chart patterns-natural
  • Level-shift cycle wild multi-universe
  • Relationship and other out of control patterns;
  • Diagnosing a process brainstorming; cause-effect Ishikava
  • Interrelationship systematic and matrix diagrams;
  • Change concepts and waste elimination
  • Performance and technical specifications
  • Attribute-process and variable-process capability studies;
  • Unstable and stable process capability studies and examples;
  • Attribute and variable improvement studies;
  • Inspection: acceptance sampling(AS)
  • lot formation single double and multiple/sequential sampling plans
  • Operating characteristic (OC) curve
  • Producer and consumer risk theoretical invalidation of AS
  • kp rule for stable and chaotic processes.

 

Source: (rgpv.ac.in)

  • Structural analysis objectives static
  • Dynamic and kinematics analyses
  • Skeletal and continuum structures
  • Modeling of infinite d.o.f. system into finite d.o.f. system
  • Basic steps in finite element problem formulation
  • General applicability of the method.
  • Discretization of the domain
  • Basic element shapes Aspect ratio
  • Shape functions
  • Generalized co-ordinates and nodal shape functions.
  • ID spar and beam elements 2D rectangular and triangular elements
  • Axisymmetric elements.
  • Concept of element assembly Global and local co-ordinate systems
  • Band width and its effects Banded and skyline assembly
  • Boundary conditions Solution of simultaneous equations
  • Gaussian elimination and Choleksy decomposition methods
  • Numerical integration
  • One and 2D applications.
  • One dimensional quadratic and cubic elements
  • Use of natural co-ordinate system
  • Area co-ordinate system continuity and convergence requirements
  • 2D rectangular and triangular requirement.
  • Analysis of trusses and frames
  • Analysis of machine subassemblies
  • Use commercial software packages
  • Advantages and limitations
  • Hamilton’s principle Derivation of equilibrium
  • Consistent and lumped mass matrices
  • Derivation of mass matrices for ID elements
  • Determination of natural frequencies and mode shapes
  • Use of commercial software packages.

 

Source: (rgpv.ac.in)

1. To study fundamentals of Computational Fluid Dynamics (CFD)

2. To perform CFD analysis of lid driven cavity in Open-Foam

3. To perform CFD analysis of square tube in Open-Foam

4. To perform CFD analysis of a 2D-plate in Open-Foam

5. To perform CFD analysis of bifurcated blood vessel in FEM

6. To study fundamentals of Finite element method and FEA

7. To perform FEM analysis of deep drawing process in FEM

8. To study fundamentals of Sci-Lab

9. To perform matrix operations in Sci-lab

10. To plot 2D & 3D graphs in Sci-lab

 

Source: (rgpv.ac.in)

1. To write a Python program to find GCD of two numbers.

2. To write a Python Program to find the square root of a number by Newton’s Method.

3. To write a Python program to find the exponentiation of a number.

4. To write a Python Program to find the maximum from a list of numbers.

5. To write a Python Program to perform Linear Search

6. To write a Python Program to perform binary search.

7. To write a Python Program to perform selection sort.

8. To write a Python Program to perform insertion sort.

9. To write a Python Program to perform Merge sort.

10. To write a Python program to find first n prime numbers.

11. To write a Python program to multiply matrices.

12. To write a Python program for command line arguments.

13. To write a Python program to find the most frequent words in a text read from a file.

14. To write a Python program to simulate elliptical orbits in Pygame.

15. To write a Python program to bouncing ball in Pygame.