Important Question Diploma (RGPV)
Table of Contents
ToggleCE-405 (7376), Water Resource Engineering,
IV Sem, Civil Branch of Diploma
Multiple Choice Questions (MCQ)
Q.1 Choose the correct answer. (RGPV 2025)
सही उत्तर का चयन कीजिए।
i) Which of the following can be used for finding the capacity of reservoir?
(a) Mass curve
(b) Duration curve
(c) Discharge Hydrograph
(d) Frequency curve
जलाशय की क्षमता ज्ञात करने हेतु निम्न में से किसका उपयोग होता है?
(अ) प्रपुंज वक्र
(ब) समय वक्र
(स) निस्तारण हाइड्रोग्राफ
(द) तीव्रता वक्र
ii) The earth dam the cut-off is located
(a) near the heel
(b) near the toe
(c) at the centre of dam
(d) at a distance 1/3rd from toe
मिट्टी के बाँध में कटऑफ दिया जाता है।
(अ) बाँध के हील पर
(ब) बाँध के टो के पास
(स) बाँध के मध्य में
(द) टो से 1/3 दूरी पर
iii) The main function of a divide wall is to
(a) Control the silt entry in the canal
(b) Prevent river floods from entering the canal
(c) Separate the under sluices from weir proper
(d) Provide smooth flow at sufficiently low velocity
विभाजक दीवार का मुख्य कार्य है।
(अ) नहर में सिल्ट का आना नियंत्रित करती है।
(ब) नदी की बाढ को नहर में जाने से रोकती है।
(स) वीयर को अधिघर्षण स्लूसों से अलग करती है।
(द) कम वेग से एक जैसा प्रवाह व्यवस्थित करना
iv) Irrigation canals are generally aligned along
(a) Ridge line
(b) Contour line
(c) Valley line
(d) Zig-zag line
समान्यतः सिंचाई नहरों का संरेखन किसके साथ किया जाता है?
(अ) रिज रेखा
(ब) कन्टूर रेखा
(स) घाटी रेखा
(द) टेड़ी-मेढी रेखा
v) The duty of well water with respect to the duty of canal water is always
(a) More
(b) Less
(c) Equal
(d) None of the above
कुएँ के पानी का जलमान हमेशा नहर के पानी के जलमान से
(अ) अधिक रहेगा
(ब) कम रहेगा
(स) बराबर रहेगा
(द) उपरोक्त में से कोई नहीं
Q.2 Choose the correct answer. (RGPV 2024)
सही उत्तर का चयन कीजिए।
i) A fine sprinkle of numerous water droplets off size less than 0.5 mm and intensity less than 1 mm/hr is known as
(a) Hail
(b) Drizzle
(c) Glaze
(d) Fog
0.5 मिमी. से कम आकार और 1 मिमी. प्रति घंटे से कम तीव्रता वाली असंख्य पानी की बूंदों वाले महीन छिड़काव को निम्न कहा जाता है
(अ) हेल
(ब) ड्रिजल
(स) ग्लेज
(द) फॉग
ⅱ) For row crops, the most commonly adopted method of surface irrigation is
(a) Furrow irrigation
(b) Base flooding
(c) Free flooding
(d) Check flooding
पंक्त्तिदार फसल के लिए, सतही सिंचाई की विधि जिसे सामान्यतः अपनाया जाता है
(अ) कुंड सिंचाई
(ब) आधार फ्लोडींग
(स) मुक्त फ्लोडींग
(द) चेक फ्लोडींग
iii) The first watering after the crop was grown by a few centimetres is known as
(a) Kor watering
(b) Initial watering
(c) Primary watering
(d) None of these
फसल कुछ सेंटीमीटर की हो जाने पर, की गई पहली सिंचाई कहलाती है
(अ) कोर सिंचाई
(ब) प्रारंभिक सिंचाई
(स) प्राथमिक सिंचाई
(द) इनमें से कोई नहीं
iv) The characteristic feature of a barrage is
(a) The provision of a raised crest over the river for flow regulation.
(b) The provision of a series of gates across the river for flow regulation.
(c) The creation of storage reservoir on the upstream side.
(d) None of these
एक बैराज का विशिष्ट लक्षण निम्नलिखित है
(अ) नदी के ऊपर एक शीर्ष दीवार बनाकर बहाव को नियंत्रित करना
(ब) नदी के ऊपर गेटों की श्रृंखला बनाकर बहाव को नियंत्रित करना
(स) नदी के ऊपरी तरफ में एक संचयन जलाशय बनाना
(द) इनमें से कोई नहीं
v) A drop in canal bed is generally provided if
(a) Ground slope exceeds designed bed slope
(b) Design bed slope exceeds ground slope
(c) Ground slope is same as the designed slope
(d) None of these
नहर तली में सामान्यतः एक ढाल दिया जाता है यदि
(अ) अभिकल्पित तली ढाल से भूमि का ढाल अधिक है।
(ब) भूमि के ढाल से अभिकल्पित तली ढाल अधिक है।
(स) भूमि का ढाल अभिकल्पित तली ढाल के बराबर है।
(द) इनमें से कोई नहीं
UNIT-I
Q.1 Define Hydrology.
जल विज्ञान को परिभाषित कीजिए। (RGPV 2025)
Q.2 State the empirical formulae for the calculation of maximum rate of run-off.
अपवाह की अधिकतम दर ज्ञात करने हेतू प्रचलित सूत्रों को लिखिए। (RGPV 2025)
Q.3 The area enclosed by the adjacent isohyets of a catchment basin are shown below:
Isohyets in cm Area enclosed in sq.km.
40-50 1500
50-60 2500
60-70 3000
70-80 2000
80-90 1000
Calculate the average depth of annual precipitation in catchment basin. (RGPV 2025)
किसी संग्रहण क्षेत्र के लिये दो लगातार आइसोहाइट के बीच का क्षेत्र निम्नानुसार है
आइसोहाइट सेमी क्षेत्रफल वर्ग किमी
40-50 1500
50-60 2500
60-70 3000
70-80 2000
80-90 1000
उस संग्रहण क्षेत्र में औसत वार्षिक अधःपतन की गहराई ज्ञात कीजिए।
Q.4 Define Runoff.
अपवाह को परिभाषित कीजिए। (RGPV 2024)
Q.5 Explain briefly Symon’s rain guage with neat sketch.
स्वच्छ रेखाचित्र के साथ साइमन के रेन गेज को संक्षेप में समझाइए। (RGPV 2024)
Q.6 The area enclosed by the adjacent isohyets of catchment basin are shown below:
Isohyets in cm Area between isohyets in sq.km.
20-30 6.0
30-40 8.0
40-50 8.5
50-60 9.0
60-70 7.0
Calculate the average depth of annual precipitation in catchment basin. (RGPV 2024)
किसी संग्रहण क्षेत्र के लिए लगातार आइसोहाइट के बीच का क्षेत्रफल निम्नानुसार है।
आइसोहाइट (cm में) आइसोहाइट के बीच का क्षेत्रफल ( sq .km”)
20-30 6.0
30-40 8.0
40-50 8.5
50-60 9.0
60-70 7.0
उस संग्रहण क्षेत्र में औसत वार्षिक वर्षा की गहराई ज्ञात कीजिए।
UNIT-II
Q.1 Define C.C.A. and G.C.A..
C.C.A. और G.C.A. को परिभाषित कीजिए। (RGPV 2025)
Q.2 What do you understand by silting in reservoir? Explain measures adopted for reducing silting in reservoir.
जलाशय में सिल्टिंग से आप क्या समझते हो? सिल्टिंग कम करने के उपायों का वर्णन कीजिए। (RGPV 2025)
Q.3 The base period, intensity of irrigation and duty of various crops under a canal system are given in table below. Find the reservoir capacity. (Neglect all losses). (RGPV 2025)

एक नहर परियोजना के अन्तर्गत आने वाली विभिन्न फसलों का आधार काल, सिंचाई तीव्रता तथा ड्यूटी का मान अग्रांकित सारणी में दिया गया है। जलाशय की धारिता ज्ञात कीजिए। (जलहानि नगण्य है)
Q.4 Define Crop rotation.
फसल चक्र को परिभाषित कीजिए। (RGPV 2025)
Q.5 State briefly the different aspects of an irrigation project.
एक सिंचाई परियोजना के विभिन्न पहलुओं को संक्षेप में लिखिए। (RGPV 2025)
Q.6 Define base period.
आधार काल को परिभाषित कीजिए। (RGPV 2024)
Q.7 Explain the factors affecting duty of water.
पानी की ड्यूटी को प्रभावित करने वाले कारकों का वर्णन कीजिए। (RGPV 2024)
Q.8 An irrigation canal has gross commanded area of 8000 hectares out of which 80% is culturable. The intensity of irrigation for Kharif season is 30% and for Rabi season 50%. Find the discharge required at the head of the canal if the duty at its head is 1000 hectares/cumec for Kharif season and 2000 hectares/cumec for Rabi season.
एक सिंचाई नहर का सकल सिंचित क्षेत्र 8000 हेक्टेयर है जिसमें से 80% कृषि योग्य है। खरीफ मौसम के लिए सिंचाई की तीव्रता 30% और रबी मौसम के लिए 50% है। यदि नहर के शीर्ष पर ड्यूटी खरीफ मौसम के लिए 1000 हेक्टेयर/क्यूमेक और रबी मौसम के लिए 2000 हेक्टेयर/क्यूमेक है, तो नहर के शीर्ष पर निस्सरण ज्ञात करें। (RGPV 2024)
Q.9 Explain the methods of assessment of irrigation water.
सिंचाई जल के मूल्यांकन की विधियाँ समझाइये। (RGPV 2024)
Q.10 Explain the methods of controlling silting in a reservoir.
जलाशय में गाद नियंत्रण की विधियाँ समझाइये। (RGPV 2024)
UNIT-III
Q.1 Enlist the various equipment uses for the construction of an earthen dam.
मिट्टी के बाँध में उपयोग आने वाले मशीनों के नाम लिखिए। (RGPV 2025)
Q.2 Write the advantages and disadvantages of a gravity dam.
गुरूत्व बाँध के लाभ-हानि लिखिए। (RGPV 2025)
Q.3 Draw a typical cross section of an earthen dam giving important part and label its various components.
मृदा बाँध का अनुप्रस्थ काट का चित्र बनाकर उसके मुख्य भागों का विवरण देते हुए विभिन्न अवयवों को दर्शाइये। (RGPV 2025)
Q.4 State reasons why?
i) Key are provided between sections of gravity dam.
ii) In a earthen dam compaction of layers is done at O.М.С. (RGPV 2025)
कारण दीजिए क्यों?
i) गुरूत्व बाँध की परिच्छेदों के बीच चाबी बनाई जाती है।
ii) मृदा बाँध में विभिन्न सतहों का संहनन अनुकूलतम जलांश पर किया जाता है।
Q.5 What is the purpose of providing drainage gallery?
गुरूत्व बांध में ड्रैनिज गैलरी उपलब्ध कराने का उद्देश्य क्या है? (RGPV 2024)
Q.6 Discuss the components with functions of an earthen dam.
मृदा बांध के कार्यों सहित घटकों की चर्चा कीजिए। (RGPV 2024)
Q.7 Draw a sketch of a gravity dam and show various forces acting on it.
गुरूत्व बांध के ऊपर कार्य करने वाले विभिन्न बलों को चित्र बनाकर दर्शाइए। (RGPV 2024)
Q.8 Define spillway and explain syphon type spillway briefly.
स्पिलवे को परिभाषित कीजिए तथा साइफन टाइप स्पिलवे को संक्षेप में समझाइये। (RGPV 2024)
UNIT-IV
Q.1 Define well irrigation.
कुँआ सिंचाई को परिभाषित कीजिए। (RGPV 2025, RGPV 2024)
Q.2 What is percolation tank? Explain its necessity and importance.
परकोलेशन टैंक क्या होते है? इनकी आवश्यकता तथा महत्व को समझाइये। (RGPV 2025, RGPV 2024)
Q.3 Explain Bandhara irrigation of the following points. (RGPV 2025, RGPV 2024)
i) its layout
ii) its location
iii) its advantages
बन्धारा सिंचाई को निम्नलिखित बिन्दुओं के अनुसार समझाइये।
i) इसका लेआउट
ii) इसकी स्थिति निर्धारण
iii) इसके लाभ
Q.4 Define tube well irrigation.
मलकूप सिंचाई को परिभाषित कीजिए। (RGPV 2025)
Q.5 Describe sprinkler irrigation and write down its advantages and disadvantages.
स्प्रिंकलर सिंचाई का वर्णन करें तथा इसके लाभ एवं हानियाँ लिखिए। (RGPV 2024)
UNIT-V
Q.1 Define Balancing depth of canal.
नहर की संतुलित गहराई को परिभाषित कीजिए। (RGPV 2025, RGPV 2024)
Q.2 Draw a typical cross-section of a canal in full cutting.
पूर्ण कटाव में एक नहर का अनुपृष्ठ काट खींचिये। (RGPV 2025)
Q.3 Distinguish between weir and barrage with neat sketch.
स्वच्छ चित्र की सहायता से वीयर और बैराज में अन्तर स्पष्ट कीजिए। (RGPV 2025, RGPV 2024)
Q.4 Write the properties of good canal lining material.
अच्छे नहर अस्तरीकरण पदार्थों के गुण लिखिए। (RGPV 2025)
Q.5 What are outlets? Explain any one type of outlet with neat sketches.
मोघे क्या है? विभिन्न प्रकार के मोघों में से किसी एक को चित्र की सहायता से समझाइये। (RGPV 2025)
Q.6 Classify the canals on the basis of its discharging capacity.
नहरों को उनकी निस्सरण क्षमता के आधार पर वर्गीकृत करें। (RGPV 2024)
Q.7 Describe the properties of good canal lining material.
अच्छी नहर अस्तरीकरण सामग्री के गुणों का वर्णन करें। (RGPV 2024)
Q.8 Draw the typical cross-section of a canal partly in cutting and partly in filling.
नहर के अनुप्रस्थ खंड का आंशिक रूप से कटाई और आंशिक रूप से भराई में चित्र बनाइए। (RGPV 2024)
Q.9 Explain the following:
i) Cross drainage works
ii) Canal fall (RGPV 2024)
निम्नलिखित को स्पष्ट करें।
i) क्रॉस ड्रेनेज कार्य
ii) नहर प्रपात
— Best of Luck for Exam —

Read Also
- Important Questions, Civil-401 (7372), Hydraulics, 4th-sem
- Important Questions, Civil-402 (7373), Advanced Surveying, 4th-sem
- Important Questions, Civil-403 (7374), Theory of Structures, 4th-sem
- Important Questions, Civil-404 (7375), Building Planning and Drawing, 4th-sem
- Important Questions, Civil-406 (7377), Transportation Engineering, 4th-sem
- Important Questions, Civil-411 (7378), Precast and Prestressed Concrete, 4th-sem
- Important Questions, Civil-412 (7379), Construction Management, 4th-sem

