Important Question Diploma (RGPV)
Table of Contents
ToggleME-403 (7408), Thermal Engineering-II,
IV Sem, Mechanical Branch of Diploma
Multiple Choice Questions (MCQ)
Q.1 Choose the correct answer. (RGPV 2025)
सही उत्तर का चयन कीजिए।
i) The thermal efficiency of an ideal gas turbine plant is given by
एक आदर्श गैस टरबाइन संयंत्र की ऊष्मीय दक्षता किसके द्वारा दी जाती है?

ii) The dryness fraction of steam can be measured accurately by
(a) Separating calorimeter
(b) Throttling calorimeter
(c) Separating and Throttling calorimeter
(d) None of the above
भाप का शुष्कतांश सटीक रूप से ज्ञात किया जा सकता है
(अ) पृथक्कारी कैलोरीमीटर
(ब) उपरोधन कैलोरीमीटर
(स) पृथक्कारी तथा उपरोधन कैलोरीमीटर
(द) उपरोक्त में से कोई नहीं
iii) A device used to put off fire in the furnace of the boiler when the level of water in the boiler falls to an unsafe limit, is called
(a) Fusible plug
(b) Blow off cock
(c) Superheater
(d) Economiser
जब बॉयलर में पानी का स्तर असुरक्षित सीमा तक गिर जाता है तो बॉयलर की भट्टी में आग बुझाने के लिए उपयोग किया जाने वाला उपकरण कहलाता है
(अ) गलन प्लग
(ब) निकास टोंटी
(स) अतितापक
(द) मितोपयोजक
iv) The flow of steam is supersonic
(a) at the entrance to the nozzle
(b) at the throat of the nozzle
(c) in the convergent portion of the nozzle
(d) in the divergent portion of the nozzle
भाप का प्रवाह सुपरसोनिक होता है
(अ) नोजल के प्रवेश द्वार परं
(ब) नोजल के कण्ठ पर
(स) नोजल के अभिसारी भाग में
(द) नोजल के अपसारी भाग में
v) The thermal efficiency of a steam turbine is ________ than that of steam engine.
(a) Lower
(b) Higher
(c) Same
(d) None of the above
भाप टरबाइन की उष्मीय दक्षता भाप इंजन की तुलना में _____होती है।
(अ) कम
(ब) अधिक
(स) बराबर
(द) उपरोक्त में से कोई नहीं
Q.2 Choose the correct answer. (RGPV 2024)
सही उत्तर का चयन कीजिए।
i) Gas turbine work on which of the following cycle
(a) Diesel cycle
(b) Brayton cycle
(c) Rankine cycle
(d) None of these
गैस टरबाइन निम्न में से किस चक्र पर कार्य करती है
(अ) डीजल चक्र
(ब) ब्रायटन चक्र
(स) रेंकाइन चक्र
(द) इनमें से कोई नहीं
ii) The latent heat of vaporization at critical point is
(a) Less than zero
(b) Greater than zero
(c) Equal to zero
(d) None of these
क्रांतिक बिंदु पर वाष्पीकरण की गुप्त ऊष्मा होती है
(अ) शून्य से कम
(ब) शून्य से ज्यादा
(स) शून्य के बराबर
(द) इनमें से कोई नहीं
iii) Which of the following is mounting of a boiler?
(a) Air preheater
(b) Fusible plug
(c) Feed pump
(d) Economizer
निम्न में से बॉयलर की आरोपिका कौन-सी है?
(अ) वायु पूर्वतापक
(ब) संगलनीय प्लग
(स) फीड पंप
(द) मितोपयोजित
iv) Flow velocity of at throat of convergent-divergent nozzle is _______ when design for maximum discharge
(a) Sonic
(b) Subsonic
(c) Hypersonic
(d) Supersonic
अभिसारी-अपसारी नॉजल के कंठ पर अधिकतम निस्सरण के समय प्रवाह वेग होता है
(अ) ध्वनि की गति
(ब) ध्वनि की गति त्ते कम
(स) अतिध्वनिक गति
(द) ध्वनि की गति से अधिक
v) Why steam turbine governing used?
(a) To increase the steam speed
(b) To decrease the steam speed
(c) To maintain speed constant
(d) All of the above
भाप टरबाइन में अधिनियंत्रण का उपयोग क्यों करते है?
(अ) भाप की गति को बढ़ाने के लिए
(ब) भाप की गति को कम करने के लिए
(स) भाप की गति को स्थिर रखने के लिए
(द) उपरोक्त सभी
UNIT-I
Q.1 Differentiate between closed cycle gas turbine and open cycle gas turbine.
बंद चक्र गैस टरबाइन और खुले चक्र गैस टरबाइन के बीच अंतर लिखिए। (RGPV 2025)
Q.2 Explain the principle of jet propulsion. Describe the working of turbo jet engine with the help of a neat diagram.
जेट प्रणोदन के सिद्धान्त को समझाइये एवं टर्बो जेट इंजन की कार्यप्रणाली को स्पष्ट चित्र की सहायता से वर्णन कीजिये। (RGPV 2025)
Q.3 Write briefly application and limitation of gas turbine.
गैस टरबाइन के अनुप्रयोग और समस्याएं संक्षेप में लिखें। (RGPV 2024)
Q.4 What are the advantages and disadvantages of gas turbine over I.C. engine?
I.C. इंजन की तुलना में गैस टरबाइन के लाभ एवं हानियाँ क्या है? (RGPV 2024)
Q.5 Describe with neat sketch the working of a closed cycle gas turbine.
एक बंद चक्र गैस टरबाइन की कार्यप्रणाली स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2024)
Q.6 What are the difference between the jet-propulsion and rocket propulsion?
जेट-प्रोपल्शन एवं रॉकेट प्रोपल्शन में अंतर बताइए। (RGPV 2024)
Q.7 Explain the principle of rocket propulsion with neat sketch.
रॉकेट प्रोपल्शन के सिद्धांत को स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2024)
UNIT-II
Q.1 Explain throttling calorimeter with the help of neat diagram.
उपरोधी कैलोरीमीटर को स्वच्छ चित्र की सहायता से समझाइये। (RGPV 2025)
Q.2 Calculate the internal energy of 1kg of steam at a pressure of 20 bar, when the steam is
i) Wet having dryness fraction 0.85
ii) Dry saturated
The volume of water may be neglected. (RGPV 2025)
20 बार दाब पर 1 किलोग्राम भाप की आंतरिक ऊर्जा की गणना कीजिये, जब भाप हैः
i) आर्द्र जिसका शुष्कतांश 85
ii) शुष्क संतृप्त
पानी का आयतन नगण्य माना जा सकता है।
Q.3 Define the following terms.
i) Wet steam
ii) Dry saturated steam
iii) Superheated steam (RGPV 2024)
निम्नलिखित को परिभाषित कीजिए।
i) आर्द्र भाप
ii) शुष्क-संतृप्त भाप
iii) अतितप्त भाप
Q.4 Draw Mollier chart and show the following processes.
i) Constant pressure process
ii) Constant enthalpy process
iii) Constant entropy process (RGPV 2024)
मोलियर आरेख बनाइए एवं उसमें निम्नलिखित प्रक्रम दर्शाइए।
i) स्थिर दाब प्रक्रम
ii) स्थिर एन्थाल्पी प्रक्रम
iii) स्थिर एण्ट्रॉपी प्रक्रम
Q.5 Determine the enthalpy, specific volume, workdone and internal energy of one kg of steam at a pressure of 5 bar, when
i) The steam is 90% dry
ii) The steam is dry saturated
iii) Temperature of steam is 300°C (RGPV 2024)
5 बार दाब पर एक किग्रा भाप की एन्थाल्पी, विशिष्ट आयतन, कार्य एवं आंतरिक ऊर्जा ज्ञात कीजिए। जबकि
i) भाप 90% शुष्क है
ii) भाप शुष्क एवं संतृप्त है
iii) भाप का ताप 300°C है
UNIT-III
Q.1 What is a boiler? How are boilers classified ?
बायलर क्या है? बायलरों को किस प्रकार वर्गीकृत किया जाता है? (RGPV 2025)
Q.2 Draw a neat sketch of the Babcock and Wilcox boiler and label its parts.
बेबकॉक तथा बिलकोक्स बॉयरल की कार्यप्रणाली स्वच्छ चित्र की सहायता से समझाइये इसके भागों को लेबल कीजिये। (RGPV 2025)
Q.3 The following observations were made in a boiler trial: Coal used 250 kg of calorific value 29800 kJ/kg water evaporated 2000 kg, steam pressure 11.5 bar, dryness fraction of steam 0.95 and feed water temperature 34°C. Determine:
i) Actual evaporation per kg of coal
ii) Equivalent evaporation from and at 100°C
iii) Boiler efficiency (RGPV 2025)
बॉयलर परीक्षण में निम्नलिखित अवलोकन प्राप्त किए गएः कोयले का उपयोग 250 किलोग्राम, उष्मीय मान 29800 kJ/kg वाष्पित पानी 2000 किलोग्राम, भाप का दाब 11.5 बार, भाप का शुष्कतांश 0.95 और भरण पानी का तापमान 34°C है। ज्ञात कीजिये
i) प्रति किलो कोयले का वास्तविक वाष्पन
ii) 100°C से तुल्यमान वाष्पन
iii) बॉयलर दक्षता
Q.4 Write name of any three boiler mountings and three accessories.
किन्हीं तीन बॉयलर आरोपिकाओं एवं तीन उपसाधनों के नाम लिखिए। (RGPV 2025)
Q.5 Classified the steam boiler with example.
भाप बॉयलर को उदाहरण सहित वर्गीकृत कीजिए। (RGPV 2024)
Q.6 In a boiler test 1250 kg of coal are consumed in 24 hours. The mass of water evaporated is 13000 kg and mean effective pressure is 7 bar the feed water temperature was 40°C, calorific value of coal is 30000 kJ/kg. Determine (RGPV 2024)
i) Equivalent evaporation from and at 100°C
ii) Efficiency of the boiler
एक बॉयलर के परीक्षण में 24 घंटे में 1250 कि.ग्रा. कोयले की खपत होती है। वाष्पित हुए पानी का द्रव्यमान 13000 कि.ग्रा. है एवं माध्य प्रभावी दाब 7 बार है। भरण पानी का तापमान 40°C, कोयले का कैलोरी मान 30000 kJ/kg हो तो ज्ञात कीजिए।
i) समतुल्य वाष्पीकरण 100°C पर
ii) बॉयलर की दक्षता
Q.7 Describe with neat sketch the working of Babcock and Wilcox boiler.
बैबकॉक व विलकॉक्स बॉयलर की कार्यप्रणाली स्वच्छ चित्र बनाकर समझाइए। (RGPV 2024)
Q.8 Explain with neat sketch any one of the boiler mountings.
बॉयलर आरोपिकाएँ में से किसी एक को स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2024)
Q.9 What do you understand by the term boiler draught?
बॉयलर ड्रॉट से आप क्या समझते है? (RGPV 2024)
Q.10 Explain working of Economizer with neat sketch.
मितोपयोजित की कार्यप्रणाली स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2024)
UNIT-IV
Q.1 What is nozzle? Write its uses and how it is classified.
नोजल क्या है? इसके उपयोग लिखिए और इसे कैसे वर्गीकृत किया जाता है। (RGPV 2025)
Q.2 Dry saturated steam at 10 bar flow in a nozzle isentropically to a pressure of 0.1 bar and dryness fraction 0.79. If the velocity of steam at inlet is 135 m/s. So find velocity of steam at outlet.
10 बार दाब की शुष्क संतृप्त भाप को 0.1 बार दाब तथा शुष्कतांश 0.79 तक समएंट्रोपिक प्रक्रम द्वारा नोजल में प्रसारित किया जाता है। यदि भाप का प्रारंभिक वेग 135 मी/से हो तो नोजल के निकास पर भाप का वेग ज्ञात कीजिये। (RGPV 2025)
Q.3 How the nozzle is classified?
नोजल को कैसे वर्गीकृत किया जाता है? (RGPV 2024)
Q.4 What are the effects of friction on the flow through a steam nozzle?
भाप नॉजल के माध्यम से प्रवाह पर घर्षण का क्या प्रभाव पड़ता है? (RGPV 2024)
Q.5 Steam expands from 3 bar to 1 bar in a nozzle. The initial velocity of steam is 90 m/s and the initial temperature is 150°C. The nozzle efficiency is 0.95. Determine the exit velocity.
एक नॉजल में भाप 3 बार से 1 बार दाब तक प्रसारित की जाती है। यदि भाप का प्रारम्भिक वेग 90 m/s एवं ताप 150°C तथा नॉजल की दक्षता 0.95 हो तो निकास पर भाप का वेग ज्ञात कीजिए। (RGPV 2024)
UNIT-V
Q.1 Explain the working of Steam turbine with neat sketch.
भाप टरबाइन की कार्यप्रणाली को स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2025)
Q.2 Write a short note on the compounding of steam turbine. Write the types of compounding.
भाप टरबाइन के बहुपदन पर संक्षिप्त टिप्पणी लिखिए। बहुपदन के प्रकार लिखिए। (RGPV 2025)
Q.3 How steam turbine are classified.
भाप टरबाइन का वर्गीकरण किस प्रकार किया जाता है? (RGPV 2024)
Q.4 Explain the working of De-Laval turbine with neat sketch.
डी-लावल टरबाइन की कार्यप्रणाली स्वच्छ चित्र की सहायता से समझाइए। (RGPV 2024)
Q.5 Steam issues from the nozzles of De-Laval turbine with a velocity of 1200 m/s. The nozzle angle is 20° the mean blade velocity is 400 m/s and the inlet and outlet angle of blades are equal. The mass of steam-flowing through the turbine per hour is 900 kg. Calculate (RGPV 2024)
i) Blade angles
ii) Tangential force on the blades
iii) The blade efficiency
Assume k = 0.8
डी-लावल टरबाइन के नॉजल से भाप 1200 m/s के वेग से निकलती है। नॉजल का कोण 20 deg है एवं औसत फलक वेग 400 m/s है। प्रवेश एवं निकास पर फलक के कोण समान है तथा प्रवाहित होने वाली भाप का द्रव्यमान 900 kg हो तो ज्ञात कीजिए।
i) फलक कोण
ii) फलक पर स्पर्शीय बल
iii) फलक दक्षता
k = 0.8 मान लीजिए।
Q.6 Explain the pressure velocity compounding in steam turbine with neat sketch.
भाप टरबाइन में दाब-वेग बहुपदन को स्वच्छ चित्र के द्वारा समझाइए। (RGPV 2024)
EXTRA QUESTIONS
Q.1 Write short notes (any four): (RGPV 2025)
i) P-V and T-S diagram of Brayton Cycle
ii) Rocket Engine
ii) Throttling process
iv) Boiler draught and its classification
v) Governing of steam turbines
vi) Difference between gas turbine and steam turbine plants
संक्षिप्त टिप्पणी लिखिए। (कोई चार)
i) ब्रेटन चक्र का P-V एवं T-S आरेख
ii) राकेट इंजन
iii) उपरोधी प्रक्रम
iv) बॉयलर चिमनी और उसका वर्गीकरण
v) भाप टरबाइनों का अधिनियंत्रण
vi) गैस टरबाइन और भाप टरबाइन संयंत्र के बीच अंतर
— Best of Luck for Exam —

Read Also
- Important Questions, Mechanical-401 (7406), Measurement of Metrology, 4th-sem
- Important Questions, Mechanical-402 (7407), Strength of Materials, 4th-sem
- Important Questions, Mechanical-411 (7409), Material Handling System, 4th-sem
- Important Questions, Mechanical-412 (7410), Computer Integrated Manufacturing, 4th-sem
- Important Questions, Mechanical-421 (7411), Heat Transfer, 4th-sem
- Important Questions, Mechanical-422 (7412), Refrigeration and Air Conditioning, 4th-sem

