Important Question Diploma (RGPV) , Group A – 102 (7351), Physics-I, 1st-Sem, Diploma

Important Question Diploma (RGPV)

Group A-102 (7351), Physics-I,  

I Sem, Common for All Branch of Diploma

Multiple Choice Questions (MCQ)

Q.1 Choose the correct answer. (RGPV 2024)   

सही उत्तर का चयन कीजिए। 

i) Light year is the unit of 

(a) Time                           

(b) Distance 

(c)Energy                         

(d) Speed 

प्रकाश वर्ष किसकी इकाई है 

() समय                           

() दूरी 

() ऊर्जा                             

() चाल 

ii)

iii) One Watt is equal to

(a) 1 Joule/sec.               

(b) 10 Joule/sec.

(c) 100 Joule/sec.            

(d) None of the above     

एक वाट बराबर होता है

(अ) 1 जूल/सेकेंड    

(ब) 10 जूल/सेकेंड

(स) 100 जूल/सेकेंड    

(द) उपरोक्त में से कोई नहीं

iv) The cause of surface tension is

(a) Adhesive force

(b) Cohesive force

(c) Static electrical force

(d) Force of friction

पृष्ठ तनाव का कारण है

(अ) आसंजक बल        

(ब) ससंजक बल

(स) स्थिर वैद्युत बल

(द) घर्षण बल

v) Heat transfer in solid takes place by

(a) Conduction

(b) Convection

(c) Radiation

(d) All of the above

ठोस पदार्थों में ऊष्मा स्थानांतरण किस विधि से होता है

(अ) चालन

(ब) संवहन

(स) विकिरण  

(द) उपरोक्त सभी

Q.2 Choose the correct answer.  (RGPV 2023)

सही उत्तर का चयन कीजिए।

i) Dimensional formula ML2T-3 represents

(a) Force

(b) Power

(c) Energy

(d) Work

विमीय सूत्र ML2T-3 निरूपित करता है

(अ) बल

(ब) शक्ति

(स) ऊर्जा

(द) कार्य

ii) For proper ventilation of building, window must be open near the bottom and top of the walls so as to let pass

(a) In more air

(b) In cool air near the bottom and hot air out near the roof

(c) In hot air near the roof and cool air out near the bottom

(d) In cool air near the roof and hot air out near the bottom

मकान में वायु के अच्छे चालन हेतु यह आवश्यक है कि खिडकियाँ, छत व फर्श के निकट खुली होनी चाहिए जिससे वायु का प्रवाह कमरे में रहता है

(अ) अधिक

(ब) फर्श के निकट से अधिक ठण्डी वायु प्रवेश करती है और गर्म वायु छत के निकट से निकलती है।

(स) छत के निकट से गर्म वायु प्रवेश करती है और ठण्डी वायु फर्श के निकट से निकलती है

(द) छत के निकट से ठण्डी वायु प्रवेश करती है और गर्म वायु फर्श के निकट से बाहर निकलती है।

iii) Moment of inertia of a solid sphere about an axis passing through its diameter is. ठोस गोले का उसके व्यास से गुजरती अक्ष के परितः जडत्व आघूर्ण है

iv) Two bodies of masses m and 4m are moving with equal kinetic energies. The ratio of their linear momentum is m तथा 4m द्रव्यमान के दो पिण्ड समान गतिज ऊर्जा से गतिमान हैं। उनके रैखिक संवेग का अनुपात है

(a) 1:2   

(b) 1:4

(c) 4:1       

(d) 1:1

v) At critical temperature the surface tension of a liquid

(a) is zero

(b) is infinity

(c) is same as that any other temperature

(d) cannot be determined

क्रांतिक ताप पर किसी द्रव की पृष्ठ तनाव

(अ) शून्य होता है

(ब) अनन्त होता है

(स) किसी अन्य ताप पर पृष्ठ तनाव के समान होता है

(द) निर्धारित नहीं किया जा सकता है

Q.3 Choose the correct answer. (RGPV 2022)

सही उत्तर का चयन कीजिए।

i) Scalar quantity is

(a) Momentum 

(b) impulse

(c) acceleration     

(d) work

अदिश राशि है

(अ) संवेग 

(ब) आवेग

(स) त्वरण         

(द) कार्य

ii) Heat transfer in vacuum is

(a) by conduction only

(b) only by convection

(c) by radiation only

(d) through all three, conduction convection radiation

निर्वात में ऊष्मा स्थानांतरण होता है

(अ) केवल चालन द्वारा

(५) केवल संवहन द्वारा

(स) केवल विकिरण द्वारा

(द) चालन संवहन विकिरण तीनों के द्वारा

iii) If A-B = 0 and both are non zero vectors it means

(a) A and B are opposite

(b) A is perpendicular to B

(c) A and B are unit vectors

(d) A and B are parallel vectors

यदि A-B = 0 हो तथा दोनों अशून्य सदिश हो तो इसका तात्पर्य है कि

(अ) A तथा B विपरीत होंगे

(ब) A तथा B लबवत होंगे

(स) A तथा B एकांक सदिश

(द) A तथा B समानांतर होंगे

iv) 0.1 horsepower is equal to

(a) 746 Watt

(b) 74.6 Watt

(c) 7.46 Watt

(d) 7460 Watt

0.1 एक अश्व शक्ति बराबर है

(अ) 746 बाट

(ब) 74.6 वाट

(स) 7.46 वाट

(द) 7460 वाट

v) Upon lifting the stone upward work done by gravitational force will be

(a) positive

(b) zero

(c) negative

(d) none of the above

पत्थर को ऊपर उठाने पर गुरुत्वीय बल द्वारा किया गया कार्य है

(अ) धनात्मक

(ब) शून्य

(स) ऋणात्मक

(द) इनमें से कोई नहीं

UNIT-I

Q.1 What is meant by least count of measuring instrument? Write formula for least count of Vernier callipers. किसी मापन यंत्र के अल्पतमांक से आप क्या समझते है? वर्नियर कैलिपर्स के अल्पतमांक का सूत्र लिखिये। (RGPV 2024)

Q.2 State the principle of homogeneity of dimensions and check the correctness of the equation V2 = u2 + 2as by dimensional analysis. Where symbols have usual meaning. विमाओं के समांगता का सिद्धांत लिखिये तथा विमीय विश्लेषण की सहायता से समीकरण V2 = u2 + 2as की शुद्धता की जाँच कीजिये। जहाँ प्रतीकों के सामान्य अर्थ है। (RGPV 2024)

Q.3 Explain the term error in measurement. Also explain the types of errors in measurement. मापन में त्रुटि से क्या तात्पर्य है? विभिन्न प्रकार की त्रुटियों को समझाइये। (RGPV 2024)

Q.4 Explain fundamental physical quantity with examples. मूल भौतिक राशि को उदाहरण सहित समझाइए। (RGPV 2023)

Q.5 The measure of the diameter of the cylinder is (2.50±0.01) cm and its length is (7.0±0.1) cm. Calculate the percentage error in its volume. एक बेलन का व्यास (2.50±0.01) सेमी तथा लंबाई (7.0 ± 0.1) सेमी है, इसके आयतन में प्रतिशत त्रुटि की गणना कीजिए। (RGPV 2023)

Q.6 The velocity of sound waves V through a medium may be assumed to depend on  (RGPV 2023)

i) the density of the medium ‘d’

ii) the modulus of elasticity ‘E’

Deduce by the method of dimensions the formula for the velocity of sound.

किसी माध्यम से ध्वनि तरंगों V का वेग किस पर निर्भर माना जा सकता है?

i) माध्यम के घनत्व ‘d’

ii) प्रत्यास्थता गुणांक ‘E’

विमीय विधि द्वारा ध्वनि के वेग के सूत्र को निगमित कीजिए।

Q.7 The diameter of a wire is measured to be 0.254 cm by a screw gauge. If the least count of the screw gauge is 0.001 cm, calculate the possible percentage error in the appropriate measurement. एक स्कू गेज के द्वारा किसी तार का व्यास 0.254 सेंटीमीटर नापा जाता है। यदि स्कू गेज की अल्पतमांक 0.001 सेंटीमीटर हो तो उपयुक्त नाप में संभावित प्रतिशत त्रुटि की गणना कीजिए। (RGPV 2022)

Q.8 What do you mean by fundamental unit and derived units. differentiate with example. मूल मात्रक तथा व्युत्पन्न मात्रक से क्या अभिप्राय है? उदाहरण देकर अंतर स्पष्ट कीजिए। (RGPV 2022)

Q.9 Explain the term error in measurement. Also explain the types of errors in measurement. मापन में त्रुटि से क्या तात्पर्य है? विभिन्न प्रकार की त्रुटियों को समझाइए। (RGPV 2022)

UNIT-II

Q.1 Define unit vector and zero vector. इकाई सदिश और शून्य सदिश की परिभाषा दीजिये।(RGPV 2024)

Q.2 Explain rocket propulsion on the basis of the law of conservation of momentum. संवेग संरक्षण के सिद्धांत के आधार पर रॉकेट प्रणोदन को समझाइये। (RGPV 2024)

Q.3 Define linear velocity and angular velocity and establish relation between them. रेखीय वेग और कोणीय वेग को परिभाषित करते हुए उनमें संबंध स्थापित (RGPV 2024)

Q.4 Write a statement of the law of parallelogram for vector addition. Draw a diagram also. सदिश योग के लिए समांतर चतुर्भुज के नियम का कथन लिखिए। रेखाचित्र भी बनाइए। (RGPV 2023)

Q.5 Define impulse and write its one application. आवेग को परिभाषित कीजिए तथा इसका एक अनुप्रयोग लिखिए। (RGPV 2023)

Q.6 State the law of conservation of linear momentum and derive it from Newton’s law of motion. रेखीय संवेग संरक्षण का नियम लिखिए तथा इसे न्यूटन के गति के नियम से व्युत्पन्न कीजिए। (RGPV 2023)

Q.7 Find the angle between the vectors    and . सदिशों तथा के बीच का कोण ज्ञात कीजिए। (RGPV 2023)

Q.8 Explain centrifugal force with an example. अपकेन्द्रीय बल को उदाहरण सहित समझाइए। (RGPV 2023)

Q.9 Why does a cyclist lean inward when moving along a curve path? Determine the angle through which a cyclist bends from the vertical while negotiating a curve. वक्र पथ पर गति करते समय साइकिल सवार अन्दर की ओर क्यों झुक जाता है? वक्र पथ पर गति के दौरान साइकिल सवार उर्ध्वाधर से जिस कोण से झुक जाता है, उसे ज्ञात कीजिए। (RGPV 2023)

Q.10 When a bullet is fired from a gun, the gun pushes backwards. Explain the reason. बदूक से गोली दागने पर बंदूक पीछे की ओर धक्का लगाती है। कारण समझाइए। (RGPV 2022)

Q.11 If A=i+j-k and B=2i+3j+pk are mutually perpendicular vectors, then find the value of p. यदि A=i+j-k तथा B=2i+3j+pk परस्पर लंबवत सदिश है तो p का मान ज्ञात कीजिए। (RGPV 2022)

Q.12 What is the angle of repose. Prove that their tangential force at rest is equal to the coefficient of extreme friction. विराम कोण किसे कहते है सिद्ध कीजिए कि विराम को उनकी स्पर्श ज्या चरम धर्षण गुणांक के बराबर होती है। (RGPV 2022)

UNIT-III

Q.1 Define Energy. Write its unit and dimensional formula. ऊर्जा की परिभाषा दीजिये। इसकी इकाई तथा विमीय सूत्र लिखिये।  (RGPV 2024)

Q.2 What is Limiting friction? Write the laws of friction. सीमांत घर्षण क्या है? घर्षण के नियम लिखिये। (RGPV 2024)

Q.3 Prove that the total mechanical energy of a freely falling body under gravity is always conserved. सिद्ध कीजिये कि मुक्त रूप से गिरते हुए पिंड की कुल यांत्रिक ऊर्जा संरक्षित रहती है। (RGPV 2024)

Q.4 Define work and write its unit and dimensional formula. कार्य को परिभाषित कीजिए तथा इसकी इकाई एवं विमीय सूत्र लिखिए। (RGPV 2023)

Q.5 Why a small gap is left between the iron rails of railway tracks? रेल की लोहे की पटरियों के बीच छोटा सा स्थान (गैप) क्यों छोड़ दिया जाता है? (RGPV 2023)

Q.6 Find an expression for the work done against friction when a body is made to slide up an inclined plane. जब किसी पिण्ड को झुके हुए तल पर ऊपर खिसकाया जाता है तो घर्षण के विरूद्ध किए गए कार्य के व्यंजक को निगमित कीजिए। (RGPV 2023)

Q.7 The limiting frictional force between the two planes is 10 Newton and the normal reaction between them is 70 Newton. Find the coefficient of friction between the two surfaces  दो तलों के बीच सीमांत घर्षण बल 10 न्यूटन है तथा उनके बीच अभिलंब प्रतिक्रिया 70 न्यूटन है। दोनों तलों के बीच घर्षण गुणांक ज्ञात कीजिए। (RGPV 2022)

Q.8 How many types of frictional force are there? What is meant by limiting friction. घर्षण बल कितने प्रकार के होते है? सीमांत धर्षण से क्या अभिप्राय है? (RGPV 2022)

Q.9 Prove that the total mechanical energy of a freely falling body under gravity is always conserved. सिद्ध कीजिए कि स्वतंत्रता पूर्वक गुरुत्व के अधीन ऊध्र्ध्वाधर नीचे गिरती वस्तु की कुल यांत्रिक ऊर्जा सदैव संरक्षित रहती है। (RGPV 2022)

UNIT-IV

Q.1 What do you understand by Torque? Write its example. बल-आघूर्ण किसे कहते है? इसके उदाहरण दीजिये। (RGPV 2024)

Q.2 Explain law of conservation of angular momentum. Write its two applications. कोणीय संवेग संरक्षण का सिद्धांत समझाइये तथा इसके दो अनुप्रयोग लिखिये। (RGPV 2024)

Q.3 What do you mean by rotational motion? Obtain an expression for the rotational kinetic energy of a body rotating about an axis. घूर्णन गति से आप क्या समझते है? किसी अक्ष के परितः घूमते हुए किसी पिंड की घूर्णन गतिज ऊर्जा के लिए सूत्र प्राप्त कीजिये। (RGPV 2024)

Q.4 What do you understand by radius of gyration? परिभ्रमण त्रिज्या से आप क्या समझते हैं? (RGPV 2023)

Q.5 The winding road of the mountains is not flat, but raised slightly from outside, why? पहाड़ों की घुमावदार सड़क समतल न होकर बाहर की ओर से कुछ ऊपर उठी हुई होती है, क्यों? (RGPV 2022)

Q.6 Why does the velocity of rotation increase when a dancer brings her outstretched arms closer to her body while spinning? explain. घूमते हुए जब एक नर्तकी फैलाए हुए हाथों को अपने शरीर के नजदीक से आती है तो उसका घूमने का वेग क्यों बढ़ जाता है? समझाइए। (RGPV 2022)

Q.7 What do you understand by angular momentum? Establish a relation between angular momentum and rotational kinetic energy. कोणीय संवेग से आप क्या समझते हो? कोणीय संवेग और घूर्णन गतिज ऊर्जा में संबंध स्थापित कीजिए। (RGPV 2022)

UNIT-V

Q.1 Write statement and equation of Bernoulli’s theorem. बरनौली के प्रमेय का कथन तथा समीकरण लिखिये।  (RGPV 2024)

Q.2 Explain why steel is more elastic than rubber. स्टील, रबर से अधिक प्रत्यास्थ क्यों है? समझाइये। (RGPV 2024)

Q.3 Explain surface tension on the basis of molecular theory. आण्विक सिद्धांत के आधार पर पृष्ठ तनाव को समझाइये।   (RGPV 2024)

Q.4 Define angle of contact and write factor affecting it. स्पर्श कोण को परिभाषित कीजिये तथा इसे प्रभावित करने वाले कारक बताइये। (RGPV 2024)

Q.5 What is the effect of temperature and impurities on the surface tension of the liquid? ताप तथा अशुद्धियों का द्रव के पृष्ठ तनाव पर क्या प्रभाव पड़ता है? (RGPV 2023)

Q.6 Draw a labelled diagram of Fortin’s barometer and write its applications. फोर्टिन दाबमापी का नामांकित चित्र बनाइए तथा इसके अनुप्रयोग लिखिए। (RGPV 2023)

Q.7 State Hook’s law. हक का नियम लिखिए। (RGPV 2023)

Q.8 Water is flowing with a speed of 5 m/s in a horizontal pipe of cross-section area 2 x 10– 2 m2 at pressure 4 x 104 pa. If the cross-section area decreases to 0.01 m² then what will be the pressure at a small cross-section?  2 x 10– 2 m2 वर्ग मीटर अनुप्रस्थ काट के क्षेत्रफल वाले एक क्षैतिज पाइप में 4 x 104 pa दाब पर जल 5 m/s की चाल से बह रहा है। यदि अनुप्रस्थ काट का क्षेत्रफल घटकर 0.01 m² रह जाता है तो छोटे अनुप्रस्थ परिच्छेद पर दाब क्या होगा? (RGPV 2023)

Q.9 State and prove equation of continuity. सातत्य समीकरण लिखिए तथा सिद्ध कीजिए। (RGPV 2023)

Q.10 Explain Stokes’ law स्टोक्स का नियम समझाइए। (RGPV 2022)

Q.11 Why is the spring made of iron instead of copper? स्प्रिंग तांबे की बजाय लोहे की बनाई जाती है. क्यों? (RGPV 2022)

Q.12 Explain the difference between streamline and turbulent flow of a fluid. किसी द्रव के धारा रेखीय तथा विक्षुब्ध प्रवाह में अंतर समझाइये। (RGPV 2022)

UNIT-VI

Q.1 Why is it easier to take hot tea in ceramic mug than metal mug? धातु के मग की तुलना में चीनी मिट्टी के मग में चाय पीना आसान क्यों होता है? (RGPV 2024) 

Q.2 Calculate heat required to convert 0°C of ice of 50 gm into 100°C of water.0°C की 50 ग्राम बर्फ को 100°C के 50 ग्राम पानी में बदलने के लिए आवश्यक ऊष्मा की गणना कीजिये। (RGPV 2024)

Q.3 Explain construction and working of Optical Pyrometer. प्रकाशिक उत्तापमापी की संरचना एवं कार्यविधि समझाइये।  (RGPV 2024)

Q.4 Define Specific heat and write its S.I. unit. विशिष्ट ऊष्मा की परिभाषा तथा S.I. मात्रक लिखिये।  (RGPV 2024)

Q.5 Two wires of same material are suspended by equal weights. The length of one wire is 2 m, diameter 1 mm and length of second wire is 1 m, diameter 0.5 mm. What will be the ratio of extension produced in two wires? एक धातु के दो तारों पर समान भार लटकाए गए है। इनमें से एक तार की लंबाई 2 मीटर एवं व्यास 1 मिमी. तथा दूसरे तार की लंबाई 1 मीटर और व्यास 0.5 मिमी. है। इनकी लंबाईयों में हुई वृद्धि का अनुपात क्या होगा(RGPV 2024)

Q.6 Find the amount of heat required to raise the temperature of 10 gram of iron by 100°C.[Specific heat of iron = 470 J kg-1 k-1] 10 ग्राम लोहे का तापमान 100°C तक बढ़ाने के लिए आवश्यक ऊष्मा की मात्रा ज्ञात कीजिए। [लोहे की विशिष्ट ऊष्मा = 470 J kg-1 k-1] (RGPV 2023)

Q.7 Write the difference between conduction, convection and radiation. चालन, संवहन तथा विकिरण में अंतर लिखिए। (RGPV 2023)

Q.8 Define the coefficient of linear expansion and coefficient of volume expansion, prove that  रैखिक प्रसार गुणांक तथा आयतन प्रसार गुणांक को परिभाषित कीजिए। सिद्ध कीजिए (RGPV 2023)

Q.9 The temperature difference on the Celsius scale is 15°C What would be the temperature difference on the Fahrenheit scale? सेल्सियस पैमाने पर तापांतर 15°C है। फारेनहाइट पैमाने पर तापांतर कितना होगा? (RGPV 2022)

Q.10 Explain the difference between conduction convection radiation. चालन संवहन विकिरण में अंतर स्पष्ट कीजिए। (RGPV 2022)

Q.11 How much space should be left between two rails while laying them in the rail track? If the length of the tracks is 10 meters at 0°C and the temperature can rise up to 50°C ? The linear expansion coefficient of steel = 1.1 x 10– 5 °C. 6 रेल की पटरी में बिछाते समय दो कितना स्थान छोड़ा जाए? यदि पटरियों की लंबाई 0°C 10 मीटर हो तथा ताप 50o C तक बढ़ सकता है? स्टील का रेखीय प्रसार गुणांक 1.1 x 10-5 °C है।  (RGPV 2022)

— Best of Luck for Exam —