Important Question Diploma (RGPV)
Table of Contents
ToggleEx-401 (7436), Fundamental of Power Electronics,
IV Sem, Electrical Branch of Diploma
Multiple Choice Questions (MCQ)
Q.1 Choose the correct answer. (RGPV 2025)
सही उत्तर का चयन कीजिए।
i) The No. of p-n junctions in a thyristor is
थाइरिस्टर में कितने p-n जंक्शन होते है
(a) 1
(b) 2
(c) 3
(d) 4
ii) For normal SCRs, turn-on time is
(a) less than turn off time, tq
(b) more than tq
(c) equal to tq
(d) above half of tq
नार्मल SCRs में टर्न ऑन टाइम होता है
(अ) टर्न ऑफ टाइम tq से कम
(ब) tq से अधिक
(स) tq के बराबर
(द) tq के आधे से अधिक
iii) In a single phase full converter, for continuous conduction, each pair of SCR’s conduct for
सिंगल फेस फूल कन्वर्टर, जिसमें कन्डक्शन निरंतर है, हर पेयर के SCR’s कितने समय कन्डक्ट करते हैं
(α) π-α
(b) π
(c) α
(d) π+α
iv) SMPS are superior to linear power supplier in respect of
(a) size and efficiency
(b) efficiency and regulation
(c) regulation and noise
(d) noise and cost
SMPS लीनियर पॉवर सप्लायर के संदर्भ में सुपिरियर होते है
(अ) साइज तथा दक्षता
(ब) दक्षता तथा रेग्यूलेशन
(स) रेग्यूलेशन एवं नॉइस
(द) नॉइस तथा कास्ट
v) Natural commutation of a thyristor takes place when
(a) anode current becomes zero
(b) gate current becomes zero
(c) voltage across the device becomes zero
(d) voltage across the device becomes negative
थायरिस्टर का प्राकृतिक कम्यूटेशन तब होता है जब
(अ) एनोड धारा शून्य हो जाती है
(ब) गेट धारा शून्य हो जाती है
(स) डिवाइस में वोल्टेज शून्य हो जाती है
(द) डिवाइस में वोल्टेज नेगेटिव हो जाती है
Q.2 Choose the correct answer. (RGPV 2024)
सही उत्तर का चयन कीजिए।
i) Three terminals of a power IGBT are
(a) Gate, Source and Drain
(b) Gate, Emitter and Collector
(c) Base, Emitter and Collector
(d) Base, Source and Drain
पॉवर IGBT के तीन टर्मिनल है
(अ) गेट, सोर्स एंव ड्रेन
(ब) गेट, एमिटर एवं कलेक्टर
(स) बेस, एमिटर एवं कलेक्टर
(द) बेस, सोर्स एवं ड्रेन
ii) Which of the following device is bidirectional?
इनमें से कौन सी उपकरण Bidirectional है?
(a) TRIAC
(b) SCR
(c) GTD
(d) BJT
iii) In an SCR the latching current is ___________ the holding current.
(a) lower than
(b) higher than
(c) same as
(d) negative of
SCR में जो लैचिंग करंट होता है, वह होल्डिंग करंट के ___________
(अ) कम होता है
(ब) ज्यादा होता है
(स) बराबर होता है
(द) का नकारात्मक होता है
iv) Which is the control element in an SCR?
(a) Anode
(b) Cathode
(c) Gate
(d) Grid
SCR में नियंत्रण तत्व कौन-सा है?
(अ) एनोड
(ब) केथोड
(स) गेट
(द) ग्रिड
v) In a UJT the emitter terminal is
(a) Always of the N-type
(b) P-type for an N-bar
(c) Always of the P-type
(d) Of the N-type for a P-bar
UJT में एमिटर टर्मिनल है
(अ) हमेशा N-type प्रकार का
(ब) N-bar के लिये P-type का
(स) हमेशा P-type प्रकार का
(द) P-bar के लिये N-type का
UNIT-I
Q.1 Explain concept of single electron transistor.
सिंगल इलेक्ट्रान ट्रांजिस्टर का कनसेप्ट समझाइये। (RGPV 2025)
Q.2 Write uses of IGBT.
IGBT के उपयोग लिखिए। (RGPV 2025)
Q.3 Explain with diagram construction of IGBT.
डायग्राम की मदद से IGBT की कन्स्ट्रक्शन समझाइये। (RGPV 2025)
Q.4 Explain with diagram construction and working principle of power transistor.
डायग्राम की मदद से पॉवर ट्रांजिस्टर का कन्स्ट्रक्शन तथा कार्य प्रणाली को समझाइये। (RGPV 2024)
Q.5 Draw V-I characteristic of IGBT.
IGBT की V-I अभिलक्षण बनाइये। (RGPV 2024)
Q.6 Write short note on Nanotechnology.
नेनोटेक्नालॉजी पर संक्षिप्त टिप्पणी लिखिए। (RGPV 2024)
UNIT-II
Q.1 Explain two transistor analogy of SCR.
SCR की दो ट्रांजिस्टर एनेलॉजी समझाइये। (RGPV 2025)
Q.2 Draw V-I characteristics of SCR and explain.
SCR की V-I अभिलक्षण बनाइये तथा समझाइये। (RGPV 2025)
Q.3 Explain how mounting and cooling of SCR is done.
SCR का माउन्टींग तथा कूलिंग समझाइये। (RGPV 2025)
Q.4 Give names of types of thyristors.
थायरिस्टर के विभिन्न प्रकारों के नाम बताइये। (RGPV 2024)
Q.5 Explain working of SCR.
SCR की कार्य प्रणाली समझाइये। (RGPV 2024)
Q.6 Describe over voltage and over current protection in SCR.
ओवर वोल्टेज तथा ओवर करंट प्रोटेक्शन SCR को समझाइये। (RGPV 2024)
UNIT-III
Q.1 Explain SCR triggering using UJT.
UJT ट्रीगरिंग SCR को समझाइये। (RGPV 2025)
Q.2 Write different turn on methods of SCR.
SCR के विभिन्न टर्न ऑन तरीके लिखिए। (RGPV 2025)
Q.3 Explain Class-B type of commutation technique.
क्लास-B प्रकार के कम्यूटेशन तकनीक को समझाइये। (RGPV 2025)
Q.4 Briefly explain SCR Turn ON methods.
संक्षिप्त में SCR के टर्न ऑन विधियों को समझाइये। (RGPV 2024)
Q.5 Explain class C commutation.
क्लास C कम्यूटेशन को समझाइये। (RGPV 2024)
Q.6 Write types of SCR Turn OFF methods.
SCR के विभिन्न टर्न ऑफ तरीके लिखिए। (RGPV 2024)
UNIT-IV
Q.1 Explain firing angle and conduction angle.
फायरिंग एंगल तथा कन्डक्शन एंगल समझाइये। (RGPV 2025, RGPV 2024)
Q.2 Explain working principle of a single phase fully controlled rectifier.
एक चरण फूल नियंत्रित दिष्टकारी के कार्यसिद्धांत को समझाइये। (RGPV 2025)
Q.3 Derive an expression for output voltage for R-L load in a single phase fully controlled rectifier.
निर्गत वोल्टेज R-L लोड एक सिंगल फेस फुल कन्ट्रोल्ड रेक्टीफायर में उसका सूत्र ड्राइव कीजिए। (RGPV 2025)
Q.4 Draw circuit diagram for single phase half controlled rectifier.
सिंगल फेस कन्ट्रोल्ड रेक्टीफायर हाफ वेव का सर्किट डायग्राम बनाइये। (RGPV 2025)
Q.5 Draw input and output waveforms for the above rectifier.
उपरोक्त रेक्टीफायर का इनपुट तथा आउटपुट वेवफार्म बनाइये। (RGPV 2025)
Q.6 Derive output voltage equations for the above rectifier? What is the effect of free wheeling diode in the above rectifier circuit?
उपरोक्त रेक्टीफायर का आउटपुट वोल्टेज डिराइव कीजिए। फ्रीविलिंग डायोड का प्रभाव उपरोक्त रेक्टीफायर सर्किट में क्या होगा ? (RGPV 2025)
Q.7 Explain working principle of single phase fully controlled bridge rectifier.
सिंगल फेस फुल्ली कन्ट्रोल्ड ब्रिज रेक्टीफायर की कार्य प्रणाली को समझाइये। (RGPV 2024)
Q.8 Derive expression for output voltage for the above rectifier.
उपरोक्त रेक्टीफायर का आउटपुट वोल्टेज का सूत्र ज्ञात कीजिए। (RGPV 2024)
Q.9 Explain working of single phase midpoint controlled rectifier.
सिंगल फेस मिडपाईंट कन्ट्रोल्ड रेक्टीफायर की कार्यप्रणाली को समझाइये। (RGPV 2024)
Q.10 What is the effect of freewheeling diode in above rectifier?
उपरोक्त रेक्टीफायर में फ्रीविलींग डायोड का प्रभाव बताइये। (RGPV 2024)
Q.11 Write names of different configurations of bridge controlled rectifier.
ब्रिज कन्ट्रोल्ड रेक्टीफायर के विभिन्न कन्फीग्यूरेशन के नाम बताइये। (RGPV 2024)
UNIT-V
Q.1 Explain UPS offline as well as online.
UPS ऑफ लाइन तथा ऑनलाइन समझाइये। (RGPV 2025)
Q.2 Explain SCR based D.C. circuit breaker.
SCR के आधार पर डी.सी. सर्किट ब्रेकर समझाइये। (RGPV 2025)
Q.3 Explain Bungler’s alarm system.
बगलर अलार्म सिस्टम समझाइये। (RGPV 2025)
Q.4 Explain illumination controlled system using TRIAC.
TRIAC को उपयोग में लेकर इल्यूमिनेशन कन्ट्रोल्ड सिस्टम’ समझाइये। (RGPV 2025)
Q.5 Explain working of SMPS.
SMPS की कार्यप्रणाली समझाइये। (RGPV 2025, RGPV 2024)
Q.6 Explain emergency light system.
इमरजेन्सी लाइट सिस्टम को समझाइये। (RGPV 2025)
Q.7 Explain with diagram Battery charger using SCR.
SCR की मदद से बैटरी चार्जर का डायग्राम बनाये तथा समझाइये। (RGPV 2024)
Q.8 Explain how fan speed controlled using TRIAC.
ट्रायक की मदद से पंखे की स्पीड कैसे कन्ट्रोल्ड कर सकते हैं, समझाइये। (RGPV 2024)
Q.9 Explain UPS system.
UPS सिस्टम को समझाइये। (RGPV 2024)
Q.10 Explain SCR based A.C. circuit breaker.
SCR बेसड A.C. सर्किट ब्रेकर समझाइये। (RGPV 2024)
Q.11 Explain temperature controller using SCR.
SCR का उपयोग कर तापमान कन्ट्रोलर समझाइये। (RGPV 2024)
— Best of Luck for Exam —

Read Also
- Important Questions, Electrical-402 (7437), Electric Power Transmission and Distribution, 4th-sem
- Important Questions, Electrical-403 (7438), Induction, Synchronous and Special Electric Machines, 4th-sem
- Important Questions, Electrical-411 (7439), Industrial Drives, 4th-sem
- Important Questions, Electrical-412 (7440), Industrial Automation and Control, 4th-sem
- Important Questions, Electrical-421 (7441), Electrical Testing and Commissioning, 4th-sem
- Important Questions, Electrical-422 (7442), Electrical Estimation and Contracting, 4th-sem

