Important RGPV Question
CE-603(B), Precast & Modular Construction,
VI Sem, CE
UNIT 1- Introduction to Prefabrication
Q.1) Explain in brief about the different types of Structural Systems used in Prefabricated Structures? (RGPV MAY 2023)
Q.2) Explain in detail about the concept of modular coordination and state its significance in prefabricated structures. (RGPV MAY 2023)
Q.3) List out the System of Prefabrication and mention its advantage and disadvantage (RGPV MAY 2023)
Q.4) Discuss the process of production, transportation and erection of prefabrication. (RGPV MAY 2023)
Q.5) Discuss the need for prefabrication in construction industry. (RGPV MAY 2022)
Q.6) Discuss the important aspects to be taken for consideration while during production, transportation and erection of precast elements. (RGPV MAY 2022)
Q.7) Discuss the need of modular coordination and standardization of prefabricated structures in detail. (RGPV MAY 2022)
UNIT 2-Prefabricated Components
Q.1) Illustrate classification of Wall panels and Shear walls. (RGPV MAY 2023)
Q.2) With the Flow chart explain the manufacturing process of roof and floor slabs. (RGPV MAY 2023)
Q.3) Write briefly about types of wall panels. (RGPV MAY 2023)
Q.4) Write a brief note on Column structures. (RGPV MAY 2023)
Q.5) State the merits and demerits of the constructions of large panels. (RGPV MAY 2022)
Q.6) Compare the benefits of shear wall over the conventional load bearing brick masonry wall. (RGPV MAY 2022)
Q.7) Explain in detail about connections and joints for wall panels. (RGPV MAY 2022)
UNIT 3-Design Principles
Q.1) Explain the methods for measuring precipitation and the differences between recording and non-recording rain gauges. (RGPV MAY 2023)
Q.2) Explain expansion joint and flexibility joint. (RGPV MAY 2023)
Q.3) Analyse the problems in design because of joint flexibility. (RGPV MAY 2023)
Q.4) Illustrate the design of cross-section based on efficiency of the materials. (RGPV MAY 2022)
Q.5) What are the precautions should be taken during disuniting of structures? (RGPV MAY 2022)
UNIT 4-Joints in Structural Members
Q.1) What are the connections and list out the different types of connections? (RGPV MAY 2023)
Q.2) Compare the merits and demerits of expansion joints in prefabricated structures. (RGPV MAY 2023)
Q.3) List out the general recommendations for the design of an expansion joint. (RGPV MAY 2022)
UNIT 5-Design of Abnormal Load
Q.1) Illustrate the IS code provision for abnormal effects. (RGPV MAY 2023)
Q.2) Describe in brief about any two of the following: i) Damping ii) Earthen Walls iii) Degree of Progressivity (RGPV MAY 2023)
Q.3) Discuss the codal provisions to calculate the equivalent design load when it is subjected to earthquake loading. (RGPV MAY 2022)
Q.4) Distinguish between intensity and magnitude of earthquake. (RGPV MAY 2022)
EXTRA QUESTIONS
Q.1) Design a concrete wall panel of 8 m height and 5 m long and 200 mm thick and restrained against rotation at the base and restrained at the ends. If it is to carry a load of 180 kN at the top. Another factored load horizontal to the wall is 8.45 kN at the top. Check the safety of the wall. f=20, f=415. Check the shear in the wall if the vertical lad is 864 kN. (RGPV MAY 2023)
Q.2) Generalize the steps involved in the process of disuniting of prefabricated structures. (RGPV MAY 2023)
Q.3) Discuss the various factors which influence the response of precast structural components. (RGPV MAY 2022)
Q.4) State the Aims and basics of modular construction. (RGPV MAY 2022)
Q.5) Distinguish between one way and two way prefabricated slabs. (RGPV MAY 2022)
Q.6) Write short notes on: i) Modular planning for a residential apartment ii) Box Prefabricates (RGPV MAY 2022)
— Best of Luck for Exam —
